Test diesel fuel for water content

So far “Water Detecting Paste” is the only way to detect drinking water in a fuel tank. Drinking water detecting past only lets you know that you have water at the bottom of the tank. It does nothing to identify the suspended water which is doing damage to your diesel powered engine key parts.

The actual Dieselcraft Fluid Engineering, Energy Test #W-1 is the earlier warning system to test with regard to 200 ppm suspended h2o in diesel fuel, aircraft fuel, kerosene and gas. It tells you water is actually suspended in the fuel as well as near the point where this drops out and gets free water then leading to major problems.

Results are instant.

The kit consists of 1 2 dram glass vials with the reaction powder tablet in it and one transfer pipette. Cost is only $9. ninety five per test.

The test is easy and can be done by anyone.

one Remove the capsule from the examination vial.

2 . Take a energy sample from any area in the fuel system utilizing the supplied pipette.

4. Include fuel to the empty vial FIRST, 3/4 full.

five. Take the capsule and open it up by pulling off the coloured half. The catalyst with the clear portion of the pills. Pour the continents (white powder) into your test vial with fuel. Put on the actual lid and shake regarding 10 seconds.

6. Arranged the vial on the table to permit the mixture to settle and also examine the results. 100-200 ppm water will give you pink places in the white powder. A lot more than 200 ppm water will certainly turn all the powder very hot pink.

7. If you have much more that 200 ppm normal water in fuel you need to take activity.

www.yuchaiie.com